High Freeboard Semi-Floating Wooden Dock/Ramp Kit 19213

Wooden Frame and Decking Not Included

BEFORE ORDERING – Check with your local building/zoning authorities and neighbourhood association for permits and other requirements.

A Multinautic® dock system is a simple way to expand your outdoor living space! This complete dock/ramp hardware kit is made from marine‐grade hot‐dip galvanized steel and premium foam filled floats, and will allow you to easily assemble a wooden semi‐floating dock or ramp. The unit can be installed with a high freeboard floating dock (Costco Item# 204934) and/or a fixed dock (Costco Item# 204884) for a complete dock layout. Whatever your waterfront requires, Multinautic® has the dock to accommodate those needs. This dock RAMP KIT will give you a smooth transition between shoreline and dock, and because one extremity is supported /anchored to shoreline, while the other extremity is on floats, it will automatically adjust to water level fluctuations of up to 3’ (this kit can also be converted into a full floating dock, by simply ordering 2 additional R-600 floats and some more wood supports).  NOTE:  For LOWER Freeboard Ramps & Docks, great for canoes and kayaks, please check out our other dock kits on this website.  Designed to be both sturdy and long‐lasting, a Multinautic® docking system will provide years of enjoyment!

Features:

• Hardware for a 4 ft. x 16 ft. or 6 ft. x 12 ft. semi-floating wooden dock/raft or other sizes as per your needs
• Includes everything needed to build a dock except the wood and anchoring
• Create the layout and configuration to fit your needs
• Marine-grade hot-dip galvanized steel (complies with ASTM and CSA standards)
• Easy to assemble (requires at least 2 adults to assemble)
• Compatible with all other Multinautic® high freeboard wooden dock kits
• Requires 5.1 cm x 15.2 cm (2 in. x 6 in.) and/or 5.1 cm x 20.3 cm (2 in. x 8 in.) lumber (not included)
• Life expectancy under normal residential use – 25 years
• You will build your very own dock RAMP just like real dock professionals do

Kit Includes:

• 6 – inside corners
• 8 – back plates
• 2 – side leg holders
• 2 – leg piles 1.2 m (4 ft.)
• 2 – base plates
• 2 – safety pile caps
• 2 – connector hinges 1.9 cm (¾ in.) pin
• 2 – R-600 foam-filled floats 40.6 cm x 61 cm x 122 cm (16 in. x 24 in. x 48 in.)
• Wood screws
• Lag bolts & washers for floats
• Carriage bolts and nuts for steel hardware

Lumber Guide for a 1.2 m x 4.9 m (4 ft. x 16 ft.) Dock Section (products not included):

• Main sides: (2x) 5.1 cm x 20.3 cm x 4.9 m (2 in. x 8 in. x 16 ft.)
• Inside joist: (1x) 5.1 cm x 20.3 cm x 4.8 m (2 in. x 8 in. x 15.7 ft.)
• Interior supports: (4x) 5.1 cm x 20.3 cm x 54.9 cm (2 in. x 8 in. x 21.6 in.)
• End pieces: (2x) 5.1 cm x 20.3 cm x 113.8 cm (2 in. x 8 in. x 44.8 in.)
• Decking boards: (33x) 5.1 cm x 15.2 cm x 121.9 cm (2 in. x 6 in. x 48 in.)
• Float and frame supports: (4x) 5.1 cm x 15.2 cm x 122 cm (2 in. x 6 in. x 48 in.)

Anchoring Guide for one dock section installation or linked only to a fixed dock (products not included):

• (see the “How to Build your Dock” guide)
• Galvanized chain 5/16 in. x 2 to 3 times water depth
• Anchoring blocks
• HDG shackles (do not use zinc‐plated quick links)

Recommended Tools (products not included):

• 1.9 cm (3/4 in.) and 0.22 cm (9/16 in.) socket with ratchet
• Impact air wrench (or ratchet)
• Cordless drill
• 1.3 cm (½ in.) drill bit
• Square bit for #10
• Hammer
• Saw

Specifications:

• Dimensions (L x W x H): 4.9 m x 1.2 m x 67.3 cm (16 ft. x 4 ft. x 26.5 in.)
• Weight: 114 kg (250 lb.)

Warranty:

• • 3 years