Boat ramp kit for craft up to 2500LB in blue The Home Depot exclusive

SKU 19226 |
0 out of 5
Availablity

in stock

489$ USD

Our boat roller ramps in kits for small boats are perfect for storing your boats sheltered from waves and water level fluctuations. They will protect the hull, propeller or turbine of your watercraft from sand and rocks.

They are the easiest way to refuel and prevent accidental spills from waves for a clean environment.

2,500 lbs capacity ramps kits.

Wood required, not included.

Availablity

in stock

Also available at

Find this product in store or online via our authorized retailers or dock contractors.

This product is currently not available to be ordered online on this site.

in stock

Description

This Multinautic R-2500 ramp kit allows you to build your own ramp for small boats or personal water craft up to 2500 lbs. Its higher quality rollers allow for an easier lift and will smoothly operate with heavy PWC. Securely beach your boat or PWC on the shore line and prevent any damages to hull or turbine due to sand or rock abrasion. Being secured on the ramp, your PWC or small craft will never rub on, or underneath the dock due to wave action. You can also remove the drain plug of your fishing boat in order to make sure it will not fill with water and sink. Peace of mind for a very small investment.

  • This 4-set of wheel kit allows for different lengths of boats and PWCs. It’s designed to roll up different hull shapes. Note that wood is not included in this kit but can be bought on homedepot.com. See the Assembly Guide on this page for the sizes and quantities
  • The self-adjusting tilting axles and the ribbed wheels will nest the hull without marking it. These axles feature an exclusive system that prevents the wheels to wobble outward the structure, keeping them aligned with the keel roller
  • Kit includes 4 pairs of double rollers, a sturdy winch with a 20 ft webbing strap w/hook, adjustable post kits, protection bumper and keel roller, galvanized steel reinforcement corner and leg holder brackets and all the requested fasteners
  • The posts are stabilized with base plates that let them get through a hole to be pounded in the ground. These plates also keep them from being driven deeper. After installation, ramp inclination can be modified by adjusting the posts in the leg holders
  • A rubber keel roller guides your boat centered to the ramp, rising it on the frame. As this section is below water level, this part is essential when water drops and let the first set of wheels sticking out before you had a chance to adjust the posts
  • Required material to complete the project: pressure treated wood. Download the assembly guide on this page for the detailed listing

Wood required, not included.

Specifications

Dimensions

Assembled Dept (in inches)200
Assembled Weight (in lbs)30Assembled Width (in inches)72
INCLUDED IN THE BOX
  • 4 pairs of double rollers
  • Sturdy winch with a 20 ft webbing strap w/hook
  • Adjustable post kits
  • Protection bumper and keel roller
  • Galvanized steel reinforcement corner
  • Leg holder brackets
  • All the requested fasteners
NOT INCLUDED
  • Pressure treated wood.
  • Download the assembly guide for the detailed listing

Necessary tools

Drill bits
Drill
Hammer
Hand Saw
Level
Measuring tape
Screwdriver
Wrench