19373

Semi-Floating Wood Dock Kit 4 ft. x 16 ft. or 6 ft. x 12 ft.

SKU 19373U |
0 out of 5
Availablity

in stock

1070$ USD
Availablity

in stock

Also available at
Home Depot

Find this product in store or online via our authorized retailers or dock contractors.

This product is currently not available to be ordered online on this site.

in stock

Description

Multinautic, your US Dock Specialist presents this dock kit that contains all the necessary galvanized steel hardware, fasteners and foam filled commercial floats to let you build a medium free-board Semi-Floating Dock with the following suggested dimensions to fit your needs : 6 ft. W x 12 ft. L or 4 ft. W x 16 ft. L. A semi-floating ramp is required between a fixed dock (or the shore or a wall) and a floating dock section to allow self-adjusting and a smooth transition. This kit does not include the wood. Plans, lumber cut size listing and instructions supplied with the kit will help you build a sturdy structure of exceptional quality at a very affordable price. This Semi-Floating Ramp Kit can be added to a new or existing floating dock with a pair of heavy-duty hinges, sold separately (item 19133).

  • You can use this dock as a stand-alone, if bottom of a lake or river drops rapidly, but make sure to have it well anchored with crossed chains at the end, for that purpose, it’s suggested to get a pair of chain retainers such as Multinautic Dock Kit, item 19111
  • This semi-floating dock can be combined to any medium or low free-board floating wood dock such as Multinautic dock kits models 19419 with the addition of a pair of dock hinges (item 19133 sold separately)
  • Includes two 24 in. W x 48 in. L x 12 in. H premium polyethylene foam filled floats have a 450 lbs. buoyancy each and their medium height allows easy boarding on boats and pontoon as well as lower PWC such as kayaks
  • There is a limited lifetime warranty on galvanized steel brackets and back plates and a limited 15-year warranty on foam filled floats
  • Heavy-duty hot dip galvanized steel corner brackets and back plates are 1/4 in. thick, inside joists corner brackets and back plates are 1/8 in. thick, and the heavy-duty leg holders are 3/16 in. thick
  • The floats are manufactured in the United States by Hendren Plastics. Eagle Floats exceed all the Marine Industry standards for encapsulated dock flotation using cutting edge technology: Infrared telemetry – Computer controlled steaming

Specifications

Dimensions

Assembled Dept (in inches)192
Assembled Weight (in lbs)17Assembled Width (in inches)72

Necessary tools

Drill bits
Drill
Hammer
Hand Saw
Level
Measuring tape
Screwdriver
Wrench

Related products